What is Level 3 Creosote?

What is Level 3 or Glazed Crosote - Cincinnati OH - Chimney Care CompanyWhen you’re sitting in front of a cozy fire, the last thing you’re likely to be thinking about is the condition of your chimney. However, if you don’t give it some thought before you light that next fire, your enjoyment may be very short-lived. Dirty chimneys can cause chimney fires, which can damage structures, destroy homes and injure or kill people. These fires can burn explosively, causing flames and/or dense smoke to shoot from the top of the chimney. However, slow-burning chimney fires don’t get enough air or have enough fuel to be as dramatic or visible, but the temperatures they reach are very high and can cause just as much damage to your chimney’s structure.

THE FORMATION OF CREOSOTE

You’re probably asking yourself, “what exactly is creosote, and how, exactly, is it dangerous to allow it to accumulate inside my chimney?” It’s fairly easy to explain really. Your fireplace was designed to safely contain and expel the byproducts of the combustion process. As these byproducts exit the fireplace and flow up into the relatively cooler chimney, condensation occurs. When the condensation dries, it gradually hardens, taking the following forms: stage 1 creosote (velvety soot), stage 2 creosote (porous and crunchy), and stage 3 creosote (shiny, rock-hard glaze).

THE PROBLEMS WITH STAGE 3 CREOSOTE

The buildup of Stage 3 creosote is denser and harder than brick, and firmly adheres itself to your chimney’s inside walls, becoming a second skin. Chimney brushes can’t sweep it out and more serious abrasives that would be strong enough to break the glaze would, more than likely, damage the chimney itself. Fresh layers of creosote can build up rapidly, accumulating quickly when previously deposited layers of creosote don’t dry completely. These newly formed layers insulate the older layers from the heat of the rising wood exhaust, which eventually dries them and creates a heavy buildup of sticky creosote that eventually solidifies completely; this results in a rock-solid layer of creosote is often referred to as glaze. Increased amounts of creosote are formed from burning unseasoned softwoods in your fireplace than properly seasoned hardwoods as well.

The improper burning and/or venting of airtight wood-fire byproducts cause the conditions for excessive creosote accumulation to occur. To be more specific, stage 3 creosote deposits will form when there is a draft problem, when green or wet wood is burned, or when the draft control is set too low, which causes your fire to smolder. Stage 3 creosote removal is crucial, as it helps reduce the likelihood of a chimney fire.

Creosote becomes dangerous when it is allowed to accumulate in your chimney because it turns into a fuel source for a possible deadly chimney fire. Unfortunately, the build up of creosote can never be avoided completely; however, burning small, hot fires and using dry, seasoned wood can minimize the buildup. During your annual chimney inspection and sweeping appointment, the CSIA-certified professionals at The Chimney Care Company will come out to assess the situation and will prescribe the proper course of action to cure your chimney’s creosote woes. We will also clue you in on what caused the buildup in the first place and can suggest ways you can prevent future buildups.

By Jeff Keefer | Tagged with: Tags: , , | Leave a Comment


Visit Our Showroom!

Chimney Care Company | 413 Wards Corner Road, Loveland, Ohio 45140