Chimney Care Company's Blog

Take Care of Your Gas Fireplace and It Will Take Care of You

Many homes have a gas fireplace. Unfortunately, homeowners generally don’t think about servicing them until something goes wrong, which is usually at the most inopportune time. Whether you take a few moments to check out some of the more obvious things yourself or schedule an appointment with a trusted fireplace service technician, both can save you a lot of frustration down the line.

Guidelines for Gas Fireplace Service 

As you may or may not know, there are several different types of gas fireplaces, and the guidelines for servicing each is somewhat different. If a model has what is known as a standing pilot—the pilot light stays on all the time—the most important regular service item is the pilot assembly. Some units have a pilot light that’s only on when the unit is in use, while others use electronic ignition to light the burner directly without using a pilot system at all; both of these won’t need servicing quite as often.

For the last few decades, all unvented gas fireplaces and inserts as well as gas log sets have been manufactured with an Oxygen Depletion Sensor (ODS) to ensure safe operation of the appliance; these sensors should be cleaned every year to keep the system from becoming more sensitive and/or causing nuisance shutdowns. If you are particularly handy—one capable of changing you own oil or the spark plugs in your car without breaking something—you should be able to handle this task; however, if you are the slightest bit apprehensive about handling anything dealing with gas, it’s best to leave this to a trained, experienced professional.

The goal is to clear out the accumulation of sediment in the tiny pilot opening. A can of compressed air can be used with the included straw to direct air toward the opening to clean it out. If you opt to do this yourself, remember to make sure the pilot is OFF. If the pilot assembly is at least five years old or if you live close to salt water, this method might not be as effective as it once was, leaving you needing to seek professional assistance anyway!

Gas Fireplace Cleaning Needs 

Unvented logs are designed to burn very cleanly; as such, if you notice any black sooty deposits on your logs, it is best to stop using them immediately to make sure your logs and/or burner are set up correctly. If you aren’t absolutely sure that everything is correct, please refrain from using your fireplace until you can have a professional technician evaluate the situation for you.

Other fireplace options and gas log sets need cleaning, too, but perhaps not as often depending on the frequency of their use. Vented gas logs should be cleaned regularly if there is any sooty buildup present; there are commercially available sprays on the market to assist with this task if you are comfortable doing so. If at any point you are unsure or the least bit apprehensive, it is best to err on the side of caution and contact a professional to handle the work on your behalf.

Direct vent gas fireplaces have fixed glass panels that will likely need annual cleaning to stay clear. If the glass is collecting a black residue (soot), the fireplace should be adjusted to remedy this issue. If the glass has a gray or white film, however, there is no need to worry; there are chemical compounds in the gas itself that produce the residue (this is completely normal). The use glass cleaners containing ammonia is a huge no-no. Water and a soft cloth will usually suffice as long as you make this is part of your regular cleaning routine; adding a little vinegar to the water may save you a little elbow grease. Tougher deposits may require special fireplace glass cleaner to ensure that the job is done properly. Don’t forget to dry your glass completely and check for streaks and fingerprints before re-installing the glass!

Here at Chimney Care Company, your family’s sense of security and safety is important to us—which is why we’ve spent the last 25 years installing, repairing, cleaning and maintaining the chimneys, fireplaces and dryer vents of our neighbors in Cincinnati, southwest Ohio and northern Kentucky. To schedule an appointment, please give us a call at 513-248-9600 or click here. We appreciate your business and look forward to helping you keep your family safe and warm for years to come!

The Importance of the Chimney Chase Cover

Chase covers fit over the top, outer opening of your chimney. These covers are designed to keep precipitation, debris and animals out of your chimney and are custom made to fit your specific application; it’s similar to the lid on a shoebox. Buying a chase cover is extremely important and absolutely necessary to the life and maintenance of your chimney and your home. Because of its job function, a chase cover is more than an option; it’s a necessity!

Material Options for Every Budget… 

Everyone loves knowing that they have options. For those of you in the market for a new chase cover, you’ve got options, too. Chase cover materials run the gamut and can accommodate all budgets: galvanized steel, aluminum, copper and stainless steel. Galvanized steel covers are the least expensive; unfortunately, they rust quickly and need to be replaced within a few years. Aluminum covers don’t have the same rusting issues as their galvanized counterparts, however they’re not typically used for this function simply because the metal is too soft.

Copper is, by far, the highest quality choice and is accompanied by the largest price tag as well; if you’re in the market for that type of look (and can afford the additional cost associated with it), you can’t go wrong with copper. Stainless steel is the strongest of the four materials. It costs a bit more up front than galvanized steel, however, the mere fact that it won’t rust and should never need to be replaced again more than makes up for the increased initial investment.

Never Trust the Rust…

Many homeowners do not notice that their chase cover has begun to rust. This is because it’s all the way up on top of the chimney, which isn’t exactly the easiest place to see. Sometimes it’s easier to spot a rusted chase cover after it has rained. This is due to the fact that when the water runs off of the chimney cap and down the sides of your chimney, it carries the rust down the sides with it, leaving stains and discoloration.

It is your responsibility as a homeowner to have this problem repaired as quickly as possible to prevent more significant damage from occurring to the chimney system. If rust damage isn’t repaired, the middle of the cover may begin to sink in, which will lead to an accumulation of water, leaves, and other debris. This buildup puts more stress on your already damaged cover and could cause it to cave in completely, thereby exposing the inner workings of your chimney system to the elements.

If you’re in the market for a chase cover for your chimney — either as a replacement for a damaged cover or as an enhancement for your chimney — contact the professionals at Chimney Care Company. Our professional technicians will inspect your entire chimney system and, if necessary, will properly fit a chase cover to your chimney’s exact dimensions to ensure that it is properly sealed from the elements. Your home is an investment, and we want to help you protect it. No matter what your chimney or vent needs, contact us today. We look forward to serving you!

Local Seasoned Firewood: The Best Fuel for Your Fire

If you want your wood-burning fireplace to burn cleaner and more efficiently, choosing local seasoned firewood ranks high in importance. If you are not familiar with what this type of wood is, the term “seasoned” simply means dried. According to the Chimney Safety Institute of America (CSIA), using seasoned firewood can actually improve the performance of your fireplace and chimney. Building a fire with freshly-cut, wet wood can create smoke and odor problems and promote the rapid accumulation of large creosote deposits, which are the main cause of chimney fires. Shopping for seasoned firewood can be tricky because you do not always get sufficiently dry wood. Our staff at Chimney Care Co. often suggests to our customers to find a trustworthy local firewood cutter to be sure the wood you buy has been dried or to cut their own firewood and season it themselves through proper storage. We have some tips on drying firewood we would like to share with you to help you properly dry and store your fuel.

• Cut each piece of wood to the same length. A uniform length makes the firewood easier to store. Consider the size of your firebox when determining the right length. In general, firewood should be about three inches shorter than the width or length of the firebox.
• Before you stack, split the wood. Splitting the wood in advance of stacking it improves the drying process by exposing more of the wood to the air.
• Check the moisture content. You will want to note the amount of moisture in the wood before drying it. You want the wood to reach a moisture content of 20% to be sure it is properly seasoned. To measure the exact water content in wood, you can use a moisture meter, which can be found for around $25 at a hardware store.
• Stack the wood in alternate directions. Using this stacking pattern creates better air circulation, allowing for faster drying.
• Store your firewood off the ground. To keep the bottom of your wood pile from getting wet and absorbing moisture, build a storage shed or other structure that can keep the wood at least six inches away from the ground.
• Cover the top of the pile, but leave the sides open. When building your storage shed, be sure to include a roof. A simple lean-to structure with a roof and a floor is all you will need. You can also cover your wood pile with a tarp, however, leave the sides of the pile uncovered as the tarp can trap moisture inside. You can remove the tarp when it is warm and sunny, which will speed up the drying process.
• Store your wood for at least six months to a year.[bold] The best way of knowing your wood is properly seasoned and dry enough to burn effectively is to wait at least six months before using it as firewood.

If you have any questions about local seasoned firewood, contact Chimney Care Co. today. We are happy to tell you more about the best fuel for your fire.

Tax Credit for Upgrading Your Stove to an EPA Rated Stove

Replacing your old stove or fireplace has a variety of benefits, including being more environmentally friendly, keeping your family safe, and—best of all– saving money! Older wood stoves and fireplaces are not up to EPA standards, however; the majority on the market today is. You can tell if your stove is EPA certified because it will be labeled on the back. You can also check the EPA’s list of certified wood heaters. Stoves that are not already certified are not able to get certification; if your stove is not already certified, you must buy one that is.

Better Air Flow

Wood smoke is essentially wasted energy. EPA rated products have better insulation and improved air flow. With a properly installed EPA rated fireplace, you will see and smell much less smoke; which means less harmful chemicals in the environment. Because they are more efficient, there will be less creosote buildup in the chimney, lessening the risk of a fire and keeping your family and home safer.

Money Savings

There is also money to be saved when you make the switch. The higher efficiency means that you will spend less time and money replenishing and hauling fire wood. Making the switch means you will use up to one-third less fire wood. In addition, your purchase may qualify for a Federal Tax Credit for Consumer Energy Efficiency. Ten percent of your stove, up to five hundred dollars, may be covered. Make sure that you save all system receipts and manufacturer certifications, in case the IRS asks for proof of your energy improvements. Then, make sure to file IRS form 5695 with the rest of your tax forms.

Requirements

There are some stipulations on switching your older fireplace. You cannot sell the old fireplace because if someone else is using it, it will not help the environment, which is, of course, the EPA’s main goal. The EPA recommends that the old stove be put out of commission. The new stove must also be installed by a professional. If a certified technician installs it, you can get a rebate and be assured that it will perform properly. Stoves installed by non-professionals can be deceptively dangerous. Problems with the installation may not be initially apparent—and may result in fires. Used, non-certified stoves can either be scraped or traded in with the purchase of the new one.
Deciding on which new stove or fireplace to buy may be difficult. You have the choice of wood, pellet, or gas burning and stoves, inserts, or fireplaces. It depends on your preference, needs, and budget. There’s not a one size fits all solution. Fortunately, you can make an appointment at Chimney Care Co. and we can walk you through the wide array of options. We sell and install stoves and fireplaces, so you can count on us during the entire process. Later on, you can also call us for maintenance and repairs. We do it all! Your wallet, your family, and the environment will thank you.

What is masory spalling and how can it affect your chimney and fireplace?

As your well-built masonry chimney ages, your exterior bricks and mortar are going to naturally suffer weather-related damage. Not only do older chimneys experience deterioration, newer masonry chimneys can also show signs of damage if they are not properly maintained. Unfortunately, the decaying of chimney masonry is a slow, gradual process and not always easy to spot. The biggest signs of masonry decay include cracks, holes, and crumbled bricks and mortar. All of these signs are symptoms of spalling, a term we at Chimney Care Company often have to explain to customers. We would like to take an opportunity to inform you about the causes, impact, and repair of chimney spalling damage.

What exactly is the definition of spalling?

As described by InspectAPedia, an online encyclopedia of building inspection and repair, spalling is the chipping off or loss of surface of any masonry material, including a brick chimney, a masonry block chimney, or even concrete sidewalks.

What causes spalling?

Water exposure and penetration are your masonry chimney’s biggest enemies. Most severe in colder climates, the freeze-thaw process causes major spalling damage. When water penetrates the bricks and mortar of your chimney, that water will freeze in cold temperatures and expand. As the temperatures rise and the ice thaws, parts of those bricks and mortar will break off completely due to the stress of the expansion. The more this cycle repeats in a season, the more spalling occurs, which can cause structural damage to your chimney. Other causes of spalling include masonry products that are soft, porous, improperly made, or poorly constructed.

Other than structural damage, are there other impacts of chimney spalling?

Yes, besides structural damage to your chimney, spalling can cause bricks to fall into your chimney and make it unsafe by blocking the flue. Your flue should always be inspected when your chimney suffers from spalling damage. Furthermore, holes left in your chimney structure from lost bricks and mortar increase the opportunity for water penetration, which leads to more costly damages.

How can spalling be repaired?

If the damage is not too serious, the expert masons at Chimney Care Company can fill in the holes, brick by brick. However, if your chimney has undergone severe spalling damage, it will need to be torn down to a sound level and rebuilt. When a flue has also suffered damage, rebuilding the chimney allows for new flue tiles to be installed.

What are ways to prevent spalling?

Keeping water out is crucial in preventing spalling damage. To stop water leaks, you should be sure you do not have a damaged or missing chimney crown or chimney cap. Damaged flashing also leads to water penetration of your masonry chimney. Our certified technicians at Chimney Care Company can inspect, repair, and install all three of these essential components of your chimney. We can also apply a 100% vapor-permeable waterproofing formula to further protect your masonry from water-caused spalling damage.

If you have noticed signs of spalling on your chimney, contact Chimney Care Company today. Our masons will take care of your chimney and give their full attention to every detail.